Ideally sized with an A2-6" spindle and 1.5m nominal turning length, you'll find the C 510 will handle the vast majority of your turning requirements.

Equip it the way you want!
Romi C 510 Lathes can be equipped with a variety of tooling packages INCLUDING OPTIONAL LIVE TOOLING to enable efficient automatic machining of small and medium batches with speed and precision.

Quick change toolholder
Rear toolholder
Gang tool system
8-station horizontal axis electrically driven turret

One Tough Machine

Headstock
The C 510 headstock is driven by a powerful, continuously variable speed AC motor through pulleys and poly-V belt. The main spindle is supported by permanently lubricated, precision bearings. These high load capacity bearings provide rigidity and maximum vibration absorption under severe cutting conditions, producing excellent quality parts.

Bed
Supported by a robust internally ribbed casting that absorbs vibrations during heavy cutting conditions. The induction-hardened and ground prismatic and plane guide ways assure positive and permanent contact with the bed.

These features assure rigidity, stability and accuracy across the full power spectrum of the C 510.

Live Tooling
WTO radial and axial live tool holders can be supplied as an option to further increase the productivity of your C 510.

Live Tooling

C 420 & C 510 Catalog in PDF Format

C 510 Flyer PDF

C Series Inset 1

C Series Inset 2

C Series Inset 3

Specifications for the C 510 CNC Lathe

Technical Specifications		Romi C 510

Capacity
Center height	mm (in)	260 (10.23)
Distance between centers	m (in)	1.5 (59.05)
Swing over bed	mm (in)	520 (20.47)
Swing over cross slide	mm (in	255 (10.03)
Swing over saddle wings	mm (in)	450 (17.71)
Travel (X axis)	mm (in)	280 (11.02)
Travel (Z Axis	mm (in)	1,555 (61.22)
Bed
Width	mm (in)	340 (13.38)
Height	mm (in)	336 (13.22)
Headstock
Spindle nose	ASA	A2-6" A2-8"
Spindle hole diameter	mm (in)	65 (2.55) 80 (3.15)
Speed range	rpm	3-3,000 2-2,200
Feeds
Rapid traverse (Z axis)	m/min (ipm)	10 (393.70)
Rapid traverse (X axis)	m/min (ipm)	10 (393.70)
Manual Tailstock
Body positioning	-	manual (std) or by cross slide (optional)
	-	manual (std) or by cross slide (optional)
Quill drive	-	manual (std) pneumatic orhydraulic (optional)
	-	manual (std) pneumatic orhydraulic (optional)
Maximum quill stroke	mm (in)	130 (5.12)
Quill diameter	mm (in)	80 (3.15)
Quill taper hole	MT	4
Quick Change Toolholder (optional)
Holders	-	3
Toolholder size:
Square	mm (in)	25 x 25 (1 x 1)
Bar (diameter)	mm (in)	25 (1)
Rear Toolholder (optional)
Toolholder size:
Square	mm (in)	25 x 25 (1 x 1)
Bar (diameter)	mm (in)	32 (1-1/4)
WTO Toolholder (VDI-50 Toolholder/DIN 69880-50) (optional)
Axial Live tool holder	DIN 6499	ER-40 (Ø 4 - Ø 26 mm)
Radial Live tool holder	DIN 6499	ER-40 (Ø 4 - Ø 26 mm)
Toolholder size:
Square	mm (in)	32 x 32 (1-1/4 x 1-1/4)
Bar (diameter)	mm (in)	40 (1-1/2)
8-position Disk Type Automatic Turret (optional)
Number of stations / tools	-	8 / 8
Station-to-station indexing time	s	0.6
Turret indexing time	s	1.5
Toolholder size:
Square	mm (in)	25 x 25 (1 x 1)
Bar (diameter)	mm (in)	32 (1-1/4)
Installed Power
AC Main motor (30 min)	hp / kW	15 / 11
Total installed power	kVA	20
Floor Space Required (front x side) (*)
1.5 m between centers	m (in)	3.75 x 1.68 (147.64 x 66.14)
Net weight (approx.)
1.5 m between centers	kg (lbs)	-

ROMI Machine Tools, LTD. Terms and Conditions of Sale and Limited Warranty

TOP