| GE-Fanuc
21i-T Optional Equipment |
| Part
# |
Description |
|
| R89186 |
Custom Macro B |
|
| R89194 |
Extended Part Program Edit |
|
| R97069 |
Thread Cutting Retract |
|
| R99311 |
Spindle Positioning |
|
Workholding
|
Romi
recommends Rohm, Schunk, or Pratt Burnerd Chucks depending
on your application.
Please contact us for price and
availability of your preferred brand.
|
 3
Jaw Manual Chucks
|
Atlas
8” Easy-Set 3-Jaw Semi Steel Body Chuck
Maximum Speed 2,800 RPM 2.346” Through hole |
|
PBA0805010 for
A2-5 Spindle
PBA0805011 for A2-6 Spindle
PBA0805023 for D1-6 Spindle.
|
| |
|
Pratt Burnerd 8” Setrite
3-Jaw 825300 Steel Body Chuck
Maximum Speed 4,200 RPM 2.25” Through
Hole.
|
|
PB805010 for A2-5 Spindle
PB805011 for A2-6 Spindle
PB805023 for D1-6 Spindle
|
| |
Pratt Burnerd 10” Setrite
3-Jaw 10253000 Steel Body Chuck
Maximum Speed 3,300 RPM 3.0” Through Hole
|
|
PB1005011 forA2-6 Spindle
PB1005023 for D1-6 Spindle
|
| |
4
Jaw Manual Chucks
|
Pratt
Burnerd 12” Medium Duty4-Jaw Independent Cast
Iron Body Chuck
w/ Solid Reversible Hard Jaws
2.95” Hole
|
|
1214411 for A2-6 Spindle
1214423 for D1-6 Spindle
|
| |
|
Pratt Burnerd 14” Heavy
Duty 4-Jaw Independent Cast Iron Body Chuck
w/ Solid Reversible Hard Jaws 2.95” Hole
|
|
1414511 for A2-6 Spindle
1414523 for D1-6 Spindle
|
| |
| 6
Jaw Manual Chucks |
Pratt Burnerd 8” Setrite
6-Jaw 826300 Steel Body Chuck
Maximum Speed 2,200 RPM 2.25” Hole
|
|
PB805010 for A2-5 Spindle
PB805011 for A2-6 Spindle
PB805023 for D1-6 Spindle
|
| Wrench
Operated Collet Chucks |
|
Lexair, Inc.
Wrench operated collet chuck, includes mounting plate
and collet wrench. 5C, 5C-2, 16C or 3J Collet types.
5C-2 is step chuck compatible
|
|
Lexair, Inc. Wrench
operated collet chuck, includes mounting plate
and collet wrench. 22J w/ Master Collet for S20 Pads.
|
|
When ordering
a Lexair wrench operated collet chuck, specify collet
type and spindle nose
|
| Pneumatic Chucks |
|
X34955-SM w/Autoblok
8.26” (210mm) pneumatic chuck with rear closed
Center, with 1.5” bar capacity. Maximum bar length
of 21.5”
A2-5” spindle. Footswitch and one set of softjaws
included. Installed
|
|
X33203- Same
as X34955 for A2-6” Spindle with 2” Bar Capacity
|
|
Additional jaw sets:
|
|
R66794-Set of three
hard jaws for 8.26” Chuck
|
|
R66792-Set of three
soft jaws for 8.26” Chuck
|
|
ONCA/Autoblok
10” Front
mounted, self contained pneumatic chuck with pushbutton
and M function actuation. 2.56” Through
hole. Adjustable clamping pressure. Mounted on A2-6 Spindle.
Maximum speed 2,800 RPM @ 87 psi.Installed
|
|
| Pneumatic Collet Closers |
|
5C Air Operated Collet Closer
with Pushbutton and M function actuation. Adjustable
clamping pressure. 1.125” Capacity Maximum Speed
4,000 RPM @ 60 PSI. Installed.
16902XD for A2-5 Spindle
16903XD for A2-6 or
D1-6 Spindle (You must specify at time of order)
|
|
16C Air Operated
Collet Closer with Pushbutton and M function actuation.
Adjustable clamping pressure. 1.625” Capacity Maximum
Speed 2,500 RPM @ 60 PSI. Installed.
17102 for A2-5 Spindle
17103 for A2-6 Spindle
17100 for D1-6 Spindle
X42083- Romi Foot
Switch for Collet Closer
Faceplates
X32842-T-slotted
faceplate, A2-5” x 16” 375
RPM Max. Speed
X33226-T-slotted faceplate, A2-6” x 16” 375
RPM Max. Speed
X33227-T-slotted
faceplate, D1-6” x 16” 375 RPM Max. Speed
|
|
| Manual
Tool Posts |
|
| Other
Packages including Riser Block are available upon request. |
|
Dorian- SD35CXARS
Super Quick Change Tool Post with Riser Block includes
|
|
2- D35CXA-1 3/4” Turning and Facing Holders
2-
D35CXA-2 3/4“ Turning, Facing and Boring
Holders
1- D35CXA-35 Drill chuck Holder
1- D35CXA-7-71C Hi
Speed/Carbide Reversible Cutoff Holder
|
|
Accessories for
SD35CXARS
|
|
D35CXA-1S 1” Capacity Turning and Facing Holder
|
|
D35CXA-35 Drill Chuck Holder - Best for <3/8” drills
|
|
D35CXA-41 1” Capacity Boring Bar Holder
|
|
D35CXA Standard Bushings for Boring Bar Holder
|
|
| Dorian-
QITP35RS
Quadra 4 Position Indexing Tool Post w/ Riser Block includes |
|
2- QITP35-13/4“ Turning and
Facing Holders
2- QITP35-2 3/4“ Turning, Facing & Boring
Holders
1- QITP35N-35 Drill Chuck Holder
1- QITP35-7-71C Reversible Cut-Off Tool Holder
|
|
Accessories for QITP35RS
|
|
QITP-35-1S 1” Turning and Facing Tool Holder
QITP35-35
Drill Chuck Holder - Best for small drills
QITP35-4
1” Boring Bar Holder
|
|
| |
|
| Automatic
Turret |
|
X33197-Duplomatic 8-station
disk type automatic turret, electrically driven Inch
system (tool holders and reduction sleeves are not included)
Cutting Diameter using the turret with standard tools
is 6.5”
|
|
Toolholders and Accessories for Duplomatic
Turret
R86804-Boring bar holder 1” diameter
R86805-Reduction Sleeve 5/16”x1”
R86806-Reduction Sleeve 3/8”x1”
R86807-Reduction Sleeve 1/2”x1”
R86808-Reduction Sleeve 5/8”x1”
R86809-Reduction Sleeve 3/4”x1”
R86811-Drill
Socket 1MTx1”
|
|
| Gang
Tooling Plate |
|
X33214-Gang Tooling Plate
with 5 tool holders- 2 boring bar holders,2 facing tool
holders and 1 turning tool holder. 1/2, 5/8 & 3/4” Reduction
Sleeves
|
|
Accessories for Gang Tooling Plate
R06018-Facing Tool Holder 3 /4” x 3 /4”
R06012-Turning
Tool Holder 3 /4” x 3 /4”
R06015-Boring Bar
Holder 1”
R06156-Reduction Sleeve 5/16”x1”
R06157-
Reduction Sleeve 3/8”x1”
R06158- Reduction
Sleeve 1/2”x1”
R06159-Reduction Sleeve 5/8”x1”
R06160-Reduction
Sleeve 3/4”x1”
R06048-Drill
Socket 1MTx1”
|
|
| Rear
Mounted Tool Post |
|
X33222-Rear mounted tool holder with a T slot base.
Includes one turning / facing (3/4” capacity) and
one boring bar holder (1” capacity).
|
|
| Tailstock
Accessories |
|
Pneumatic
Tailstock Quill
X33033-Air Operated Tailstock Quill includes Foot Switch
|
|
Tailstock
Centers
|
|
10414-
Quad-Bearing Live Center – Standard Point
|
|
10664-
CNC Quad Bearing Live Center – Extended Point
|
|
10904-
Bull Nose Live Center-Consult Romi
for additional live center choices.
|
|
| OPE01551-Tailstock
Drag Device |
|
| Steady
Rests |
|
OPE01550-Follow
Rest w/rollers 1/2-2” Capacity
X32849-Steady rest (closed) with bronze tips, 5/16” to 6” dia.
X32840-Steady rest (open) with bronze tips, 5/16” to 3 1/8” dia. |
|
Additional roller sets
|
|
XXXX--Set of bronze tips, closed steady rest 5/16” to
3 1/8”dia.
X33228-Set of bronze tips, for closed
steady rest, 3 1/8 to 6”
X33229-Set of rollers
for closed steady 5/16” to
3 1/8” dia.
X33230-Set of rollers for closed steady
rest 3 1/8 ” to
6”
X35799- Steady rest (U type) with rollers 4” to
8” dia.
X35800-Set of rollers for U type steady
rest 2” to
7
XXXXX -Set
of rollers for U type steady rest 4” to 8”
|
|
| Machine
Accessories |
|
| Transformers |
|
R35830- Electrical Transformer, 3 taps, installed
in machine enclosure
(200/210/220/230/240/250V, 50/60
Hz, 15 KVA)
R35831-
Electrical Transformer, installed in machine enclosure
(200/210/220/230/240/250/380/420/440/460/480V,
50/60 Hz, 15 KVA)
|
|
Chip
Conveyors
|
|
X33209-Chip Conveyor rear mounted, side exhaust with
26.4 gallon Reservoir
|
|
| Guarding |
|
X33154-Machine guarding
to completely enclose the work area (CE Mark) Includes
additional safety door interlocked with safety switch
|
|
| Manuals |
|
X33211 -Extra set of operating, maintenance,
programming, installation and parts manual
|
|
| Other
Market Adapter Kits |
|
X37047 -Canada (includes UL/CSA certified
main circuit breaker, delay
fuses and bases)
|
|
X37048 -Mexico (includes labels and
technical documentation in Spanish)
|
|
|
|
|
|
| |
All
machines in this series have Romi’s
patented apron technology. All controls are outside the guards
where they are not exposed to chips and coolant. The apron
can be attached or detached from the carriage as selected
by the operator. This allows automatic operation without
having the apron travel longitudinally with the carriage.
Attaching the apron allows the operator to choose the most
comfortable operating position during manual machining and
set up. The joystick can be used for facing and turning cuts
at selected feeds and speeds.
A
two piece tailstock is standard on all the M17 lathes. The
two piece construction allows for easy alignment. A dual
clamp design means you can do very large diameter drilling
using the tailstock.
•
Canned cycles for Turning, Threading & Facing (G77,
G78, G 79)
