email Romi Usa

click to login

Romi USA
1845 Airport Exchange Blvd.
Erlanger, Kentucky 41018
Telephone: 1-859-647-7566
Fax: 1-859-647-9122
Toll Free US and Canada 1-877-ROMIUSA
 

ROMI M 27

The Romi M series is the latest version of the technology pioneered by Romi since the early 1990’s. Romi has manufactured more combination lathes than any other manufacturer. Romi combination lathe technology has now been combined with GE Fanuc reliability to create the most advanced combination lathe ever built.

Software developed by Romi and GE/Fanuc gives powerful conversational programming capabilities to the 21i-T control that have not been available on any other lathe. The 21i-T retains the ability to function as a G code control. The fiber optic cable connection to the servo amplifiers as well as the compact design makes the 21i-T the ideal control for this type of lathe. A color monitor enhances visibility and ease of operation.

The CNC control panel is mounted on a pendant that is rigidly supported by an overheard arm. The pendant is capable of traveling the length of the bed for operator convenience.

All machines in this series have Romi’s patented apron technology. All controls are outside the guards where they are not exposed to chips and coolant. The apron can be attached or detached from the carriage as selected by the operator. This allows automatic operation without having the apron travel longitudinally with the carriage. Attaching the apron also allows the operator to choose the most comfortable operating position during manual machining and set up.

A two piece tailstock is standard on all the M27 lathes. The two piece construction allows easy alignment. A dual clamp design means you can do very large diameter drilling using the tailstock.

The automatic lubrication system has the oil fill port conveniently located on the front of the machine.
Warning messages are displayed on the CNC to indicate low lube oil level and lubrication system faults.

ROMI M 33
ROMI M 27

Romi has also incorporated the latest GE-Fanuc 30 HP spindle drive motor for the M series. The two speed gearbox gives the M 27 maximum torque for heavy cutting with full horsepower at speeds as low as 31 RPM. Spindle speeds are infinitely variable within each range.

M series

Romi M27 x 40”, 80” or 120” Combination Lathe
Swing over bed
26.97”
  

 
Center Distance
42.36” / 87.73” / 121.1”
    
Swing over Carriage Wings
21.26”
      
Swing over Cross Slide
16.93”
      
Cross Slide Travel (X-Axis)
14.17”
Longitudinal Travel (Z-Axis)
40.91” / 80.78” / 119.65”
    
Spindle Motor
30 HP
      
Bed Width
15”
      
Bed Height
15”
    
   
Standard Headstock
A2-8”
Optional
Headstock 1>
D1-11”
Optional
Headstock 2>
A2-11”
Through Hole
4.09”
  
4.09”
6.3”
Spindle RPM - 2 ranges
2-1,800
  
2-1,800
2-1,000

Low range
2-441 RPM
  
2-441 RPM
2-245 RPM

High range
8-1,800 RPM
  
8-1,800 RPM
8-1,000 RPM
Torque
2,798 FtLbs.
  
2,798 FtLbs.
5,275 FtLbs.

Full Horsepower at

56 RPM
  
56 RPM
31 RPM
 
Rapid Traverse
        
Longitudinal
295 IPM
      
Cross Slide
295 IPM
    
         

Accuracy

        
X-axis Repeatability
.0002”
      
Z-axis Repeatability
.0002”/ 300mm
      

Coolant System

    

Pump
.16 HP

Reservoirs
40"
80"
120"

31.7 Gallons
48.9 Gallons
64.5 Gallons

Tailstock

        

Quill Travel
7.08”
      

Quill Diameter
3.94”
      

Quill Internal Taper
5 MT
      

Tang slot
Cast In
      

Tool Knock out
Yes
      

Approximate Floor Space Required (M33x80)
115” x 75”
      
         

Approximate Machine Weight

       

40”CD
80”CD
120”CD
12,745 Lbs.
13,955 Lbs.
15,450 Lbs.


Romi M 27 x 40”/80”/120” Combination Lathe

Standard Features

• ASA A2-8” spindle nose with 4.09” (104mm) diameter hole through the spindle
• Dual range gearbox. Each range is continuously variable
• 30 HP GE-Fanuc “P” type variable speed spindle motor
• Apron with 2 electronic hand wheels, 4 position joystick and spindle motor switch for manual operation
• Apron can be attached to carriage using a simple locking mechanism
• Automatic lubrication system for guide ways Saddle / Bed and Cross Slide / Saddle
• Adjustable Z axis home position
• Complete coolant system with 1/6 HP pump.
• Transformer (200/210/220/230/240/250/380/420/440/460/480 V
50/60 Hz 40 KVA)
• GE-Fanuc CNC control is pendant mounted and is easy to move in the Z axis
• Removable chip box
• Tailstock with manual quill and dual position clamps
• Tailstock is protected by electro/mechanical safety switch
• Rear splashguard
• Overlapping sliding doors
• Work light
• Electrical cabling protected by power track for low maintenance and long life
• Set of operating, maintenance, programming, installation and parts manuals
• Electrical diagrams
• Set of leveling screws and nuts
• Set of wrenches for machine operation
• GE-Fanuc CNC control model 21i-T with Manual Guidance software
• GE-Fanuc CNC control includes tool path and part shape graphics

The M Series may be operated in any one of five ways:
1. Manually, using the X and Z hand wheels and the built-in DRO.
2. Manually, using the Manual Guidance hand wheel to move both axes simultaneously to cut radii and tapers. A box cycle is created and software limits can be set to insure precise size control for angles and radii.
3. Programs can be created by “teaching” the machine movements.
4. Programs can be created and the machine can be run using the Manual Guidance/Romi Conversational Program System. Rough and Finish Profiling, Threading, Grooving, Drilling and Tapping Conversational menus are used to generate part programs.
5. G code programming done off line or at the machine.

Standard Control Features

• GE Fanuc G Code Operating System
• GE Fanuc/Romi Machine Guidance Programming
• Tool Path and Part Shape Graphic Display with 10.4” Color LCD
• Constant Surface Speed
• Background Editing and Sub-program Editing
• Canned cycles for Turning, Threading & Facing (G77, G78, G 79)
• Chamfering and Corner Rounding
• Canned Cycles for Drilling – (G80-G89)
• Thread Repair
• Multiple Start Threading (G33)
• Rigid Tapping
• Manual Handle Feed
• MDI Operation
• Multiple Repetitive Cycle – (G70-G76)
• G Code Family A,B & C
• Tool Nose Radius Compensation (G40, G41, G42)
• Tool Geometry and Wear Compensation – 16 pairs
• Work Shift
• Inch/Metric Conversion
• Clock Function
• Run Hour and Parts Number Display
• Reader Punch Interface / RS 232
• PCMCIA Slot – for Flash Card Part Program Storage and Execution
• CNC Part Program Storage 64 Kbytes (160M)
• External Message Ladder
• Ladder Screen Visualization, Maintenance Alarms & Operating History
• English, Spanish, German or French Language Display

Romi M 27 Combination Turning Centers
  

M27 x 40
M27 x 80
M27 x 120

Price On Request
Price On Request
Price On Request

Optional Spindles

X33279-D1-11” with 4.1” diameter through hole
X33712-A2-11” with 6.3” diameter through hole



Price On Request
Price On Request

FOB East coast Port of Entry
Terms of Payment are 20% with order.
40% on Bill of Lading.
Balance due 30 days after shipment
Terms are subject to credit approval by Romi Machine Tools, Ltd

Click here to review:
ROMI MACHINE TOOLS, LTD.
TERMS AND CONDITIONS OF SALE AND LIMITED WARRANTY
GE-Fanuc 21i-T Optional Equipment
Part # Description  
R89186 Custom Macro B  
R89194 Extended Part Program Edit  
R97069 Thread Cutting Retract  
R99311 Spindle Positioning  
Workholding
    

Romi recommends Rohm, Schunk, or Pratt Burnerd Chucks depending on your application.
Please contact us for price and availability of your preferred brand.

3 Jaw Manual Chucks
Atlas 15” Easy Set 3-Jaw Semi-Steel Body Chuck
 

EZ153-012 for A2-8 Spindle Maximum Speed 1,800 RPM 4.25” Hole
   

Atlas 20” Series 342 3-Jaw Semi Steel Body Chucks incl Mounting Plate

 

2034-20A8 for A2-8 Spindle (5.51” Thru Hole)
2034-2A11 for A2-11 Spindle (6.5” Thru Hole)
2034-2D11 for D1-11 Spindle (5.51” Thru Hole)

  
 
Atlas 24” Series 342 3-Jaw Semi Steel Body Chucks
includes Mounting Plate

  

2434-2A11 for A2-11 Spindle (6.5” Thru Hole)
2434-2D11 with D1-11 Spindle (5.51” Thru Hole)

 
 
Atlas 20” Series 332 3-Jaw Forged Steel Body Chucks

2033-20A8 for A2-8 Spindle (5.51” Thru Hole)
2033-2A11 for A2-11 Spindle (6.5” Thru Hole)
2033-2D11 for D1-11 Spindle (5.51” Thru Hole)
 
Atlas 24” Series 332 3-Jaw Steel Body Chucks
 

2433-2A11 for A2-11 Spindle (6.5” Thru Hole)
2433-2D11 for D1-11 Spindle (6.5” Thru Hole)

Pratt Burnerd 15” Setrite 3-Jaw Steel Body Chuck
Maximum Speed 1,800 RPM 4.56” Hole

PB41508 for A2-8 Spindle
PB41511 for A2-11 Spindle
PB51511 for D1-11 Spindle

4 Jaw Manual Chucks

Pratt Burnerd 16” Heavy Duty 4-Jaw Independent Cast Iron Body Chuck w/ Solid Reversible Hard Jaws and A2-8 Mount

1614512 for A2-8 Spindle
1614513 for A2-11 Spindle
1614525 for D1-11 Spindle

Atlas 16” Series 441?4-Jaw Independent Cast Iron Body Chuck w/ Solid Reversible Hard Jaws (3.15” Thru Hole)

1644-1A08 for A2-8 Spindle
1644-1A11 for A2-11 Spindle
1644-1D11 for D1-11 Spindle


Atlas 18” Series 442?4-Jaw Independent Cast Iron Body Chuck w/ 2 Piece Reversible Jaws (3.94” Thru Hole)

1844-20A8 for A2-8 Spindle
1844-2A11 for A2-11 Spindle
1844-2D11 for D1-11 Spindle

Atlas 20” Series 442 4-Jaw Independent Cast Iron Body Chuck w/ 2 Piece Reversible Jaws (3.94” Thru Hole)

2044-2A11 for A2-11 Spindle
2044-2D11 for D1-11 Spindle


Atlas 24” Series 442 4-Jaw Independent Cast Iron Body Chuck w/ 2 Piece Reversible Jaws (3.94” Thru Hole)

2444-2A11 for A2-11 Spindle
2444-2D11 for D1-11 Spindle

Atlas 20” Series 432 4-Jaw Independent Steel Body Chuck w/ 2 Piece Reversible Jaws

2043-20A8 for A2-8 Spindle (4.055” Thru Hole)
2043-2A11 for A2-11 Spindle (6.5” Thru Hole)
2043-2D11 for D1-11 Spindle (4.055” Thru Hole)

Atlas 24” Series 432 4-Jaw Independent Steel Body Chuck w/ 2 Piece Reversible Jaws (4.055” Thru Hole)

2443-2A11 for A2-11 Spindle
2443-2D11 for D1-11 Spindle

Big Bore Chucks

Atlas 2033-2A11EX Oil Country 19.68” Diameter 3-Jaw Universal Chuck with 6.75” Through hole, A2-11 Mount only

Atlas 2143-2A11EX 21’ Oil Country Series, Big Bore 4-Jaw Independent Steel Body, Direct Mounted Chuck w/ 2 Piece Reversible Jaws, 6.5” Thru Hole. A2-11 Direct Mount.

Bison S05416- Oil Country 19.69” Diameter 3-Jaw Universal Chuck with set of 3 hard Jaws. 6.5” thru hole.

S03867-A2-11 Adapter Plate for Front or Rear Mounted S05416A Chuck

W84989-Sheet Metal Guarding for 500mm or 20” Rear Mounted Chuck

Hydraulic Chucks

X34963-12.4” hydraulically operated three jaw chuck with 3.5” (90mm) through hole. One set of soft jaws, hydraulic power unit and foot switch included. A2-8 Spindle Nose only
R86931-Set of three hard jaws for 12” Chuck
R74243-Set of three soft jaws for 12” Chuck Larger Hydraulic Chucks are available upon request

Faceplates
X33262-T-slotted faceplate, A2-8” x 16” 375 RPM Max. Speed
Manual Tool Posts  
Dorian-SD50DA-RS Super Quick Change Tool Post with Riser Block and,
  

2-D50DA-1 1 1/4” Turning and Facing Holders
2-D50CA-2 1 1/4” Turning, Facing and Boring Holders
1- D50DA-4 1 1/2” Heavy Duty Boring Bar Holder
1- D50CA-7-71C Hi Speed/Carbide Reversible Cutoff Holder

 
Accessories for SD50CXARS
D50DA-1-150 1 1/2” Capacity Turning and Facing Holder
D50DA-41 1 1/2” Capacity Boring Bar Holder
D50DA Standard Bushings for Boring Bar Holder
  

Dorian-QITP50-RS Quadra 4 Position Indexing Tool Post Set with Riser Block and

2- QITP50-1-N 1 1/4“ Turning and Facing Holders
2- QITP50-2-N 1 1/4“ Turning, Facing & Boring Bar Holders
1- QITP50N-4 1 1/2 Heavy Duty Boring Bar Holder
1- QITP50-7-71C Reversible Cut-Off Tool Holder

  
Accessories for QITP50RS
QITP-50-1-150 1 1/2” Turning and Facing Tool Holder
QITP-50-41 1 1/2” Boring Bar Holder
  
Automatic Turrets  

X33394-4-station automatic turret, electrically driven, Inch system
(tool holders and reduction sleeves are not included)

  

R86853-Combination tool holder, 1 1/2” Boring bar/1” Turning tool
R86856-Facing tool holder 1” x 1”
R86857-Turning tool holder 1’ x 1”
R86852-Boring Bar Holder 1 1/2” Diameter
R86876-Reduction Sleeve 3/8” x 1 1/2”
R86877-Reduction Sleeve 1/2” x 1 1/2”
R86878-Reduction Sleeve 5/8” x 1 1/2”
R86879-Reduction Sleeve 3/4” x 1 1/2”
R86880-Reduction Sleeve 1” x 1 1/2”
R86881-Reduction Sleeve 1 1/4” x 1 1/2”
R86882-Drill Socket 1MTx1 1/2”
R86883-Drill Socket 2MTx1 1/2”
R86884-Drill Socket 3MTx1 1/2”

  
X33396- 8-station disk type automatic turret, electrically driven Inch system (tool holders and reduction sleeves are not included)

Cutting Diameter using the turret with standard tools is 18.5”

R83583-Facing tool holder 1” x 1”
R86921-Turning tool holder left hand (CW turning) short 1”x1”
R86922-Turning tool holder left hand (CW turning) long 1”x1”
R83584-Turning tool holder right hand (CCW turning) short 1”x1”
R86925-Turning tool holder right hand (CCW turning) long 1”x1”
R83582- Boring bar holder 11/2” diameter
R64055- Reduction Sleeve 3/8” x 1 1/2”
R64057- Reduction Sleeve 1/2” x 1 1/2”
R64059- Reduction Sleeve 5/8” x 1 1/2”
R64045- Reduction Sleeve 3/4” x 1 1/2”
R64047- Reduction Sleeve 1” x 11/2”
R64049- Reduction Sleeve 1 1/4” x 11/2”
R64069-Drill Socket 1MTx1 1/2”
R64068-Drill Socket 2MTx1 1/2”
R64067-Drill Socket 3MTx1 1/2”
S02246- T-MAX type boring bar holder 1 1/2”
R64061- T-MAX type Drill Socket 3/4” x 1 1/2”
R64063- T-MAX type Drill Socket 1” x 1 1/2”
R64065- T-MAX type Drill Socket 1 1/4” x 1 1/2”

  
Rear Mounted Tool Posts  
X33295-Rear mounted boring bar holder with T slot base 1 1/2” diameter
X33299-Rear mounted tool holder for turning or facing with T slot base 1” x 1” capacity
  
 
 
Tailstocks  

Hydraulically Operated Tailstock Quill w/ Hydraulic power unit & footswitch.

X36636 M 27 X 40 Installed
X36638 M 27 X 80 Installed
X36640 M 27 X 120 Installed

X33304- Built in live center for either Manual or Hydraulic Tailstock Quill Tailstock Centers MT5
10415- Quad-Bearing Live Center
10445- Quad Bearing Heavy Duty Live Center
10665- CNC Quad Bearing Live Center
10905- Bull Nose Live Center

Please consult Romi for additional live center choices.
Steady Rests  

X31481-Steady rest (closed) with rollers, 1/2” to 6” diameter capacity

Additional roller sets
X35812- Set of Rollers, closed steady rest 1/2” to 6” dia.

X35814- Steady rest (U Type) with rollers, 12” to16” diameter capacity

Additional roller sets
X36168- Set of rollers for U type steady rest 4” to 8”
X36167- Set of rollers for U type steady rest 8” to12” or 12” to 16”
Machine Accessories  
Transformers  

X33378- Electrical Transformer, installed in machine enclosure (200/210/220/230/240/250/380/420/440/460/480V, 50/60 Hz)

  
Chip Conveyors
 		 

Chip Conveyor rear mounted, longitudinal exhaust.
X34985 for 40” bed (31.6 gallon coolant reservoir)
X34986 for 80” bed (48.9 gallon coolant reservoir)
X34987 for 120” bed (64.5 gallon coolant reservoir)

  

Spindle Indexing

  

OPE01587-Spindle Indexing with 72 positions (each 5 degrees) A2-8 only

  
Guarding  

X35998-Machine guarding to completely enclose the tailstock area with
Mechanical interlock between safety doors

  
Manuals  

X35715-Extra set of operating, maintenance, programming, installation
and parts manuals.

  
Other Market Adapter Kits  

X37053-Canada (includes UL/CSA certified main circuit breaker, delay
fuses and bases)

 

X37054-Mexico (includes labels and technical documentation in Spanish

  

 

 

  
 
     
home
www.romiusa.com